Size:  (X) 850 mm x (Y) 550 mm x (Z) 550 mm

• 24-station, swing-arm automatic tool changer .
• Spindle speed 10.000 (12.000) rpm
• Belt driven spindle design
• Table dimension: 1.100 x 600 mm
• FANUC 0i-M controller with LCD monitor.
• Linear guides on all axis.
• AI contour control  AICC I (AICC II)
• X/Y/Z feed motor 3/3/4 kW
• Spindle motor power(Cont. / 30min) 11( 18.5) kW

Size: (X) 1.100 mm x (Y) 550 mm x (Z) 580 mm

• High rigidity structure
• Oil Circulating Cooling System for Spindle
• Calibration with laser interferometer is performed and certified by PMC
• Enhanced Base Design
• 24 Tools Magazine
• Max. Table Load 800 kgs
• Positioning Accuracy ±0.005 mm
• Repeatability ±0.003 mm

Size: (X) 2.200 mm x (Y) 1.600 mm x (Z) 1.000 mm

• Y-axis travel: 1.600 mm / 2.100 mm / 2.600 mm
• Z-axis travel: 1.000 mm (standard)
• Z-axis travel: 800 mm (option)
• Width Of Table: 1.500 mm / 2.000 mm / 2.500 mm
• 32 Tools Atc
• X-Axis Twin Chip Screws On Table Sides
• Exchange Tool Arm
• Max. Table Load: 6.000kgs
• Positioning Accuracy: ±0,01 Mm
• Repeatability Accuracy: ±0,003 Mm

Size: (X) 850 mm x (Y) 600 mm x (Z) 600 mm

• X-axis travel: 850 mm
• Y-axis travel: 600 mm
• Z-axis travel: 600 mm
• Table load capacity: 800 kg
• Spindle speed: 8.000 rpm
• Max. Table Load: 800 kgs
• Positioning Accuracy: ± 0,005 mm
• Repeatability: ± 0,003 mm

Pallet Size: 630 mm x 630 mm

• Max work size: Ø 1.050 x H 1.115
• Spindle speed: 12.000 rpm :BT50
• Number of pallets: 2
• Travel: (X) 1.050 mm x (Y) 920 mm x (Z) 990 mm
• Loading capacity: 1.200 kg
• NC System: Matsuura G-Tech 31i

Pallet Size: 500 mm x 500 mm

• Travel: (X) 850 mm x (Y) 700 mm x (Z) 750 mm
• 4 axles
• Double pallet
• CNC: Fanuc 18i-MBRotary pallet (Axis B)
• Area: 500 mm x 500 mm.
• Spindle: 40 DV / Cat.
• with station of 60 tools
• B = 360 degrees – 0,001 incremental degrees
• Spindle speed: 12.000 rpm

Max Turning Diameter: Ø750 mm

Max Turning Length: 720 mm

• Spindle speed: 3.600 rpm
• Spindle Output: 22 kW (29,5 HP)
• Travel: (X) 290 mm x (Z) 750 mm
• Controller: HW F i series
• Chuck Size:   12”
• Spindle RPM:  3.600 r /min
• Driving Method: Gear
• No. of Tools:   12

Max Turning Diameter: Ø500 mm

Max Turning Length: 700 mm

• Spindle Speed: 4.500 rpm
• Spindle Output: 15 kW
• Travel: (X) 200 mm x (Z) 450 mm
• Controller: FANUC Oit
• Machine Weight: 3.306 kg

Max Turning Diameter: Ø 300 mm

Max Turning Length: 1.000 mm

• Spindle speed: 3.500 rpm
• Spindle Output: 22 kW
• Travel: (X) 220 mm x (Z) 1.120 mm
• No of Tools: 12
• Driving Method: Belt
• Milling Tool Speed: 4.000 r/min

Max Swing Diameter: Ø 2.000 mm

Max Turning Diameter: Ø1.800 mm

Max Turning Height: 1.200 mm

• Max work piece weight: 8.000 kg
• Spindle speed: 250 rpm

Max Machining Diameter: Ø32 mm

Max Turning Length: 315 mm

• Spindle speed: 7.000 rpm
• Spindle Output: 5,5 / 7,5 kW
• Spindle Height: 1.060 mm
• NC Control: FANUC 31i
• Spindle motor: 5.5 / 7.5 kW
• Sub-spindle speed: 8,000 rpm
• Rapids: 30 m/min

Max Turning Diameter: Ø540 mm

Max Turning Length: 1.018 mm

• Travel: (X) 540 mm x (Y) 140 mm x (Z) 1.065 mm
• Spindle speed: 5.000 rpm
• Spindle Output: 22 kW
• Weight: 7.485 kg approx

Max swing over bed: Ø 500 mm

Distance between centers: 2.000 mm

• Height of centers: 250 mm
• Bed width: 340 mm
• Max spindle speed: 2.000 rpm
• Number of gears: 24
• Spindle output: 5,5 kW
• Travel: (X) 300 mm x (Z) – depends on damping device

Turning diameter: Ø 1.100 mm

Turning Length: 2.000 mm

• Height of centers: 550 mm
• Length between centers: 2.000 mm
• Ø above transversing slide: 780 mm
• Max workpiece weight: 5.000 kg
• Spindle nose: 55022 / 11
• Spindle bore: 128 mm

Ø 300 mm x 110 mm

• Maximum module: 5 mm
• Maximum diameter of the gear wheel: 180 mm (internal gear wheel)
• Maximum number of strokes of the slider per minute: 2.000 / min
• Machine weight: 6.600 kg

Range: 900 mm x 1.000 mm x 600 mm

• Air supply: Pressure = 0,4 MPa
• Loading Weight: 1.200 kg
• Mass Weight: 2.231 kg
• Max drive speed: 519 mm/s (3-axis)
• E0,MPE:
  • with SP25M: (1,7+4L/1000) µm;
  • with TP200: (1,9+4L/1000) µm;
  • with TP20: (2,2+4L/1000) µm;
  • L = measured length [mm]

3D Acceleration: 2.309 mm/s²

Temperature compensation from 16° to 26°C, including the workpiece (2 contact sensors)

Capacity – Round: Ø 280 mm

Capacity – Square: 270 mm x 270 mm

Capacity Rectangle: 210 mm x 340 mm

• Blade drive: 1,5 kW
• Hydraulic pump: 0,18 kW
• Coolant pump: 0,12 kW
• Feeding motor: 0,37 kW
• Blade size: 3.660 mm x 27 mm x 0,9 mm
• Feeding Height: 725 mm
• Vice max opening: 355 mm
• Vice height: 170 mm

Stroke: 1.320 mm

• Tensile strength: 5000 KG at 3 m/min (3000 KG at 7 m / min)
• Broaching tool clamping: universal pulling head for flat tops
• Through-bore in the clamping table: Ø 100 mm